Phone:  (08) 9445 2755
CATEGORIES
More Categories Less Categories

AMPTRON BLUEDGE SLIMLINE 12V 200AH/200A CONTINUOUS AT-LFP-12-200-BTC-DV10 LITHIUM LIFEPO4

AMPTRON BLUEDGE SLIMLINE 12V 200AH/200A CONTINUOUS AT-LFP-12-200-BTC-DV10 LITHIUM LIFEPO4

$2,100.00

In stock

We cannot ship all products Australia-wide. Please enter your postcode to see if we can ship this product to you. //

Share this product

Description

BluEdge Series – 12V 200Ah / 200A Continuous Discharge LiFePO4 Aluminium Slimline Battery with Bluetooth and integrated communications

AMPTRON® BluEdge Series 12V 200Ah / 200A Lithium LiFePO4 Aluminium Slimline Battery. This battery is compact and powerful, with the maximum continuous discharge current being 200A and peak discharge current 400A for 3 seconds, suitable for powering a 2000W inverter from a single battery.

The battery can be conveniently monitored via a Bluetooth app, or RS485 or CANBUS communication interface.

The Amptron® BluEdge series batteries are our new premium smart battery range that raises the bar in quality and sophistication. The battery can be conveniently monitored via a Bluetooth app, RS485 or CANBUS communication interfaces.

This battery is compact and powerful, ideally suited to installations that require a narrower footprint such as in 4WDs. This battery packs in a huge 200Ah of capacity with a powerful 200A continuous discharge rate, allowing you plenty of capacity and power to run not just your fridge, but also higher-powered components such as a 2000W inverter that can comfortably run appliances such as induction cooktops, coffee machines, microwaves etc.

These batteries are designed using only the highest quality components, with innovative features and a robust tough construction that meets the modern demand for reliable long-lasting deep cycle batteries.

Dimensions

  • 430mm L x 120 mm W x 270mm H
  • Weight: 23 kg
  • Capacity: 200Ah
  • Voltage: 12V
Item
Specification
Description/Remark
Model
AT-LFP-12-200-BTC-DV10
BluEdge Series- 12V 200Ah / 200A Continuous Discharge Lithium LiFePO4 Slimline battery​ – Aluminum Case
Chemistry
Lithium Iron Phosphate (LiFePO4)
Battery dimensions
L-430mm x W-120mm x H-270mm
Weight
23kg
Cell type
3.2V 102Ah
Prismatic
Battery module
8 pcs 3.2V 102Ah cells, 2 in parallel, 4 in series
Casing material for single cell
Aluminium
Standard capacity(0.2C5A)
200Ah / 2560Wh
Cycle life
​> 6000 cycles at 100% Depth of Discharge (DoD)
Test conditions at 25C, 0.2C standard charge and discharge. Higher cycle life can be achieved at lesser charge & discharge rates
Rated voltage
12.8V
Working voltage per cell: 3.2V
Max charge voltage
14.6V
Max. charge voltage per cell: 3.65V
Recommended charge voltage
14.2V
Recommended charge voltage per cell: 3.55V
Cut-off voltage
10 to 8V
Cut-off is triggered when the first cell reaches 2.0V
Depth of discharge (DoD)
100%
Batteries can be discharged to 100% of the rated capacity
Standard charge current
40A
0.2C
Charging time
Approximately 5 hours
When charging from low voltage cut-off point
Optimum charge current range
40A (0.2C) to 100A (0.5C)
Cell max voltage < 3.9V
Rapid charging
Max. charge current 200A
Temperature increase falling within 15°C is normal. Over 15°C will affect the service life of the cells.
Max continuous discharge current
200A
1C
Peak discharge current
400A
2C (3 seconds)
Discharge performance in normal temperature
20A (0.2C) ≥ 100%
Operating temperatures
Charging: 0℃~55℃
Discharging: -20℃~55℃
Storage: -20℃~40℃ (within 2 months)
-10℃~35℃ (within 6 months)
Internal Resistance
≤20mΩ
Internal Power consumption
≤120uA
Storage performance
Capacity can be kept ≥ 80% in storage for 12months
Battery should be kept at -20℃ ~ 45℃ where it’s dry, clean and well-ventilated.
​Connecting Terminals  Pos (+)  & Neg (-)
M8
IP Rating (Ingress Protection)
IP50
Protected from limited dust ingress & Not protected from liquids