Item
Specification
Description/Remark
Model
AT-LFP-12-100HV01
12V 100Ah / 175A Continuous Discharge Lithium LiFePO4 blade battery​ – Metal Case
Chemistry
Lithium Iron Phosphate (LiFePO4)
Battery dimensions
L-635mm x W-60mm x H-260mm
Weight
16kg
Cell type
3.2V 50Ah
Prismatic
Battery module
8 pcs 3.2V 50Ah cells, 2 in parallel, 4 in series
Casing material for single cell
Aluminium
Standard capacity(0.2C5A)
100 Ah / 1280Wh
Cycle life
​> 2000 cycles at 100% Depth of Discharge (DoD)
Test conditions at 25C, 1C/1C charge & discharge. Higher cycle life can be achieved at lesser charge & discharge rates
Rated voltage
12.8V
Working voltage per cell: 3.2V
Charge voltage
14.4 – 14.6V
Max. charge voltage per cell: 3.65V
Cut-off volate
11.5 to 10V
Cut-off is triggered when the first cell reaches 2.50V
Depth of discharge (DoD)
100%
Batteries can be discharged to 100% of the rated capacity
Standard charge current
25A
0.25C
Charging time
Approximately 5 hours
When charging from low voltage cut-off point
Optimum charge current range
20A (0.2C) to 50A (0.5C)
Cell max voltage < 3.9V
Rapid charging
Max. charge current 100A (1C3A)
Temperature increase falling within 15°C is normal. Over 15°C will affect the service life of the cells.
Max continuous discharge current
175A
1.75C, cell min voltage> 2.0v
Peak discharge current
320A
3.2C (3 seconds)
Discharge performance in normal temperature
20A (0.2C3A) ≥ 100%
1C3A ≥90%
Operating temperatures
Standard 0℃~45℃
Discharge -20℃~65℃
Storage -20℃~45℃
Impedance (Max, at 1000Hz.)
≤ 10mΩ
Storage performance
Capacity can be kept ≥ 80% in storage for 12months
Battery should be kept at -20℃ ~ 45℃ where it’s dry, clean and well-ventilated.
​Connecting Terminals  Pos (+)  & Neg (-)
M8
IP Rating (Ingress Protection)
IP50
Protected from limited dust ingress & Not protected from liquids